Hambone Blues Jam

Home Decoration Tips

37 comments found

  1. @Arturo Rojas – Depending on your model, this task can differ. On some, you can reset it from the menu using your remote, others are different though. Please respond with your model information and we can provide you details. Thanks!

  2. @Arturo Rojas – I believe with that model you should be able to unplug your tv for 5-10 minutes and then plug it back in. You should get a note on the screen asking if you have replaced the lamp. Say yes and the timer should reset. Please let us know if you have any other questions! Thanks!

  3. @dragonblade8426 – You should be able to reset the lamp timer. Find the menu button on the TV and select LAMP TIME RESET in INSTALLATION menu, and press ENTER button to reset lamp operation time. Thanks and please let us know if you have any other questions!

  4. NEED TV REPAIR HELP?!
    If you need help repairing your TV please comment below the ShopJimmy video or feel free to send us a YouTube message. Please include your TV model number and the symptoms or issues your TV is displaying. The more details you can include the faster and more accurate our response will be! You may also call our customer service at (877) 881-6492!

  5. I have a Mitsubishi wd57733 replaced the dlp chip and now the lamp light is flashing during replacement of the dlp chip could I have made the lamp go bad.

  6. If the lamp and housing isn't installed properly can it cause a shadow or darkened area on the screen? I just bought a used WD65733 and the lamp was loose in the set!

  7. So glad I found this.  I think I just found the solution to my problem.  Will check with better lighting tomorrow morning, but thank you for the tip.  Will be ordering lamp off your site.  Thanks again!

  8. my tv is a 65" mitsubishi  WD65638 AND I JUST BOUGHT A REPLACEMENT LAMP AND IT WORKED FOR ABOUT AWEEK AND THEN I TURNED MY TV OFF AND TRYED TO TURN IT BACK ON LATER AND IT DIDNT COME ON AND THE BULB WASNT ON EITHER,I CHECKED THE BULB TO SEE IF IT HAD BLOWN OUT AND THERES NO SIGN OF THAT, DO U HAVE AND IDEA OF WHAT CAN BE WRONG

  9. I replced a lamp on my Model wd65733. It worked for about 3 hours and is now shutting off and showing red light. Do I need to reset the timer? If so how? Thanks.

  10. Thanks for watching our TV repair video! Due to YouTube policy changes, we are no longer answering tech support questions in the comments section or on the phone. We apologize for the inconvenience. If you need additional tech support, please visit FixYa.com or contact your local TV repair shop. Good luck and let's fix your TV today!

  11. HELP!!! I have a Mitsubishi dlp WD65-738 my problem is that the tv doesn't turn on it just has a clicking sound, I purchased the power board from you guys and installed it but it still doesn't turn on, I just hear a clicking sound and there is a constant yellow blinking light no red lights…I don't know what to do  PLEASE….

  12. I replaced my Sony 50 E2000 TV Projection Lamp, After replacing the lamp I see a flashing red light and TV wouldn't come on. How do I solve the flashing red light problem? 

  13. I have a 73" Mitsubishi DLP tv Model # WD-73638 (manufacture date 2010) The bulb blew about a year ago. instead of replacing the bulb right away, I stored the tv in a corner of our home and replaced tv with another smaller tv we already had. That tv took a dump last week, so I ordered a new, cheap bulb for the model #wd-73638 from off of ebay. It came today. I installed the bulb and turned the tv on. The tv lights up for about 15 seconds, flickers horribly and powers OFF. The red power light does not flash. I have seen no other color lights. (except solid green when the tv is on for a short time) It's extremely dirty/dusty inside the area where the bulb goes. Thick dust is caked onto the fan and other parts nearby. What do I need to do? Thanks

  14. I have just replace my wd-60638 lamp and it stays on for a few minutes and then the lamp get real bright and then TV cuts off and red light is on

  15. Thanks for the help! I have a 73735 Mitsubishi 73inch DLP and it took me less than a minute by following your instruction. He's running fine. Thanks again!

  16. I have a mitsubishi WD-73734. Heard a loud pop one day and now the tv comes on but there's no picture and it turns off after about 15 seconds.

  17. I have a WD-57733. Last year I replaced the DLP chip. Now the lamp has burned out. Ordered a replacement lamp. TV will power, audio comes on, still no picture, and after a few seconds auto shuts off.. Power light is solid, no blinks. Any suggestions.

  18. Awesome YouTube channel I have a Mitsubishi WD-73738. just recently I noticed that my screen had started to dim and now it won't turn on I have the green power light that comes on I get no picture and then it switches to a red light

  19. Oh my good friend I was wanting to ask you the Maine outer screen on my big screen looks like looks like there's a bunch of stuff behind that what's the best way to take that off and clean behind it and thanks for all your great videos you have the best repair Channel on YouTube you have helped me a few different times thanks again my great friend I hope you're going to have an amazing week

Leave comment

Your email address will not be published. Required fields are marked with *.